BIG PACi High Static Pressure Hide Away 20,0-25,0kW • R410A
25.0kW
KIT-250PE3E5D (S-250PE3E5B + U-250PE2E8A)
Big PACi has been introduced with full renewal of its indoor unit, offering hydronic application by PACi Water Heat Exchanger.
- Highly efficient with compact indoor body, -16kg lighter than conventional model (10 HP)
- Split-able Hide Away indoor design for easy & flexible piping work
- Better partial load control with Panasonic compressor
- Bluefin anti-rust coating
- PACi Water Heat Exchanger compatible
- Panasonic cloud control compatible
- 0-10V demand control
Търговски WLAN адаптер
Адаптерът за интерфейс CZ-CAPWFC1 на Panasonic позволява свързване на едно вътрешно тяло или група вътрешни тела към приложението Panasonic Comfort Cloud, което осигурява управление, мониторинг, създаване на график и предупреждения за грешки.
Ново жично дистанционно управление
CONEX с IoT интеграция С помощта на смартфон и таблет за възможни не само задълбочена работа и настройки за поддържа, но също така и сервизни и диагностични функции.
Спецификации
| BIG PACi High Static Pressure Hide Away 20,0-25,0kW • R410A | |||
|---|---|---|---|
| 25.0 kW | |||
| EER (Nominal) (1) | W/W | 2,91 C | |
| COP (Nominal) (1) | W/W | 3,39 | |
| EER (1) | W/W | 3,00 | |
| Input power cooling | kW | 7,73 | |
| COP (1) | W/W | 3,39 | |
| Input power heating | W | 8,27 | |
| Indoor power supply (Voltage) | V | 220 - 230 - 240 | |
| Indoor power supply (Phase) | Single phase | ||
| Indoor power supply (Frequency) | Hz | 50 | |
| External static pressure at shipment (with booster cable) (3) | Pa | 75 - 130 - 200 | |
| Power supply (Voltage) | V | 380 - 400 - 415 | |
| Power supply (Phase) | Three phase | ||
| Power supply (Frequency) | Hz | 50 | |
| Outdoor recommended fuse | A | 20 | |
| Outdoor dimension (Height) (5) | mm | 980 | |
| Outdoor dimension (Width) (5) | mm | 370 | |
| Outdoor dimension (Depth) (5) | mm | 138 | |
| Elevation difference (in/out) (6) | m | 30 | |
| Refrigerant (R410A) / CO2 Eq. | kg / T | 6,40 / 13,3632 | |
(1) EER and COP calculation is based in accordance to EN14511.
(2) For models below 12 kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12 kW, the SEER and SCOP is calculated based on values of EU/2281/2016.
(3) Low external static pressure setting from factory.
(4) The sound pressure of the units shows the value measured of the position 1,5 m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(5) Add 100 mm for indoor unit or 70 mm for outdoor unit for piping port.
(6) When installing the outdoor unit at a higher position than the indoor unit.
* No filter included.