Heat recovery ventilation unit

The heat recovery ventilation unit is design not only to provide a good indoor air quality, but it is also designed to recover heat that would otherwise be lost throughout ventilation. These heat recovery ventilation systems are used to assist in the retention of heat.

High indoor air quality.
The unit is designed to provide fresh filtered air into the home, while keeping a high thermal comfort.

Energy saving.
Most of the energy from the exhausted air is used to precondition the incoming air, leading to lower heating requirements in the building.

Space saving.
The compact ventilation unit can be installed over the DHW square tank or the Aquarea All in One Compact indoor unit for an space-saving solution.

Better user interface.
The Residential ventilation unit and the Aquarea Heat Pump can be controlled with one single user-friendly controller.

The newest of Aquarea

Specifications

See all
Heat recovery ventilation unit SINGLE PHASE
1.76 kW 1.76 kW
Left side connection PAW-A2W-VENTA-L
Right side connection PAW-A2W-VENTA-R
Nominal air flow rate at 50Pa m³/h 204 204
Maximum air flow rate at 100Pa m³/h 292 292
SPF at 204m³/h 1,24 1,24
Heat exchanger rotor drive type Variable speed Variable speed
Exchanger type Rotating Rotating
Heat recovery efficiency % 84 84
Power supply (Voltage) V 230 230
Power supply (Phase) Single phase Single phase
Power supply (Frequency) Hz 50 50
Power consumption W 176 176
Energy Class, basic unit A A
Energy Class, unit with local control on demand A A
Sound pressure dB(A) 40 40
Dimension (Height) mm 450 450
Dimension (Width) mm 598 598
Dimension (Depth) mm 500 500
Net weight kg 46 46
Duct connections mm DN125 DN125
Filter class, supply air F7/ePM1 60% F7/ePM1 60%
Filter class, extract air M5/ePM10 50% M5/ePM10 50%
Minimum outdoor temperature °C -20 -20

* Heat recovery efficiency according to EN 13141-7.
** Heat recovery ventilation unit is produced by Systemair.

Complementary products