Models
The GE3 Series has a top level of seasonal efficiency in this category
In addition, this product fits with special needs for commercial application thanks to DHW priority setting and auto pump down functions.
- Superior seasonal energy efficiency, maximum 240,1%
- DHW priority setting
- Operating range in heating down to -21°C and up to +24°C for air to water system
- No defrost cycle
- Capacity ratio 50 ~ 200%*
- Option of DX or chilled water for indoor heat exchange
- Maximum total piping length: 780m
* 50 ~ 200% only when one outdoor unit is installed. In other cases 50 ~ 130%.
ECO G, the advanced Gas Driven VRF
ECO G gas VRF
The ECO G system offers increased efficiency and performance across the range. Improvements include increased part load performance, reduced gas consumption with a Miller-cycle engine and reduced electrical consumption by using DC-Fan motors.
ECO G GE3 Series
Reduce by 30% electrical energy consumption giving better energy efficiency.
3-Pipe ECO G GF3 Series
3-Pipe heat recovery system with simultaneous heating & cooling.
Bringing nature’s balance indoors
nanoe™ X, technology with the benefits of hydroxyl radicals.
Abundant in nature, hydroxyl radicals (OH radicals) have the capacity to inhibit pollutants, certain viruses, and bacteria to clean and deodorise.
nanoe™ X technology can bring these incredible benefits indoors so that hard surfaces, soft furnishings, and the indoor environment can be a cleaner and pleasant place to be, whether at home, at work, or visiting hotels, shops, restaurants etc.
Smart Multisite Control Solution
Modern and scalable energy management for your Heating & Cooling solutions.
Specifications
| 2-Pipe ECO G GE3 series | SINGLE PHASE | |||||
|---|---|---|---|---|---|---|
| 16 kW | 20 kW | 25 kW | 30 kW | |||
| Refrigeration load Pdesign (Cooling) | kW | 45,0 | 56,0 | 71,0 | 85,0 | |
| Cooling ηsc (LOT21) (1) | % | 220,60 | 219,30 | 240,10 | 229,30 | |
| Hot water in cooling mode (at 65°C outlet) | kW | 23,60 | 29,10 | 36,40 | 46,00 | |
| Max COP in hot water | W/W | 1,55 | 1,55 | 1,49 | 1,47 | |
| Gas consumption cooling | kW | 41,10 | 52,10 | 67,20 | 84,10 | |
| Heating capacity (Standard) | kW | 50,0 | 63,0 | 80,0 | 95,0 | |
| Heating capacity (Low temperature) | kW | 53,0 | 67,0 | 78,0 | 90,0 | |
| Refrigeration load Pdesign (Heating) | kW | 37,0 | 53,0 | 60,0 | 65,0 | |
| Heating ηsh (LOT21) (1) | % | 150,60 | 143,70 | 146,90 | 151,30 | |
| Gas consumption heating (Standard) | kW | 38,00 | 51,10 | 68,60 | 75,30 | |
| Gas consumption heating (Low temperature) | kW | 45,40 | 62,70 | 60,70 | 73,90 | |
| Starter amperes | A | 30 | 30 | 30 | 30 | |
| Sound power (Normal mode) | dB(A) | 80 | 80 | 84 | 84 | |
| Sound power (Silent mode) | dB(A) | 77 | 77 | 81 | 81 | |
| Piping diameter (Fuel gas) | Inch (mm) | 19,05 (R3/4) | 19,05 (R3/4) | 19,05 (R3/4) | 19,05 (R3/4) | |
| Piping diameter (Exhaust drain port) | mm | 25 | 25 | 25 | 25 | |
| Piping diameter (Hot water supply in/out) | Rp3/4 (Nut, thread) | Rp3/4 (Nut, thread) | Rp3/4 (Nut, thread) | Rp3/4 (Nut, thread) | ||
| Elevation difference (in/out) | m | 50 | 50 | 50 | 50 | |
| Refrigerant (R410A) / CO2 Eq. | kg / T | 11,50 / 24,00 | 11,50 / 24,00 | 11,50 / 24,00 | 11,50 / 24,00 | |
| Maximum number of connectable indoor units | 26 | 33 | 41 | 50 | ||
1) SEER/SCOP is calculated based on the seasonal space cooling/heating efficiency “η” values of the COMMISSION REGULATION (EU) 2016/2281.
Hot water take out function added, EU safety regulation standard cleared. 25HP chassis enlarged due to specification improvement. Pre-coat corrosion fin. Auto pump down function.