Connection with general equipment
Panasonic centralized control system.
ON / OFF control for external devices such as ERV
Controls 1 unit.
CZ-CAPC3
Demand control for Mini ECOi and PACi outdoor units
Up to 4 outdoor units.
CZ-CAPDC3
Mini Seri-Para I/O Unit 0 - 10 V
Controls 1 indoor unit or a group of 8 indoor units.
CZ-CAPBC2
Communication Adaptor
Up to 128 groups. Controls 128 units.
CZ-CFUNC2
Local adaptor for ON / OFF control.
CZ-CAPC3
Control and status monitoring is possible for individual indoor unit (or any external electrical device up to 250 V AC, 10 A) by contact signal.
For example: fan coil unit etc. Total heat exchanger unit.
Demand control for Mini ECOi and PACi outdoor units.
CZ-CAPDC3
Demand control and forced stop are possible from the central control device.
Forced stop input for fire alarm input control.
3 step demand control for staged control of outdoor unit capacity.
1. Central control device. Fire alarm device
Mini Seri-Para I/O Unit 0 -10 V.
CZ-CAPBC2
Control and status monitoring is possible for individual indoor unit (1 group).
In addition to operation and stop, there is a digital input function for air speed and operation mode.
Temperature setting and measuring of the indoor suction temperature can be performed from central monitoring.
Power is supplied from the T10 terminal of the indoor units.
The analog input for demand of the outdoor capacity by 20 steps (from 40% to 120%) by 0-10 V.
The analog input for temperature setting is 0 to 10 V, or 0 to 140 Ohm.
Separate power supply also is possible (in case of suction temperature measuring).
* Ask to your distributor.
1. Remote station / 2. Central control panel
Communication adaptor for VRF connectivity.
CZ-CFUNC2
This communication interface is required to connect a ECOi and GHP systems to a BMS. CZ-CFUNC2 is very easy to operate and to connect to the Panasonic S‑Link, which is the ECOi bus. From the CZ-CFUNC2, all the indoor and outdoor units of the installation can be easily control. Two linked wiring systems can be connected to one CZ-CFUNC2.
Dimensions (H x W x D): 260 x 200 x 68 mm.
* As this is not a splash-proof design, it must be installed indoors or in the control panel, etc.