PACi Elite Low Static Pressure Hide Away • R410A
The depth of only 250mm provides greater installation flexibility and the unit can be used in more applications. Ideal for sites with narrow ceiling voids.
- Automatic learning function for the required static pressure on site during commissioning (a standard wired remote controller is required. S-60/71/100/125/140PN1E5B models only)
- Compact indoor units without loosing static pressure (only 250 mm high)
- 50 Pa static pressure
- Easy maintenance and service via external electrical box
- 3 speed centrifugal fan through wired or Infrared remote controller
- DC FAN for better efficiency and control
- Easy connection and control of external fan or ERV using the connector PAW-FDC on the indoor unit PCB. The external device can be controlled by the remote control of the Panasonic indoor unit
Teknik Özellikler
PACi Elite Low Static Pressure Hide Away • R410A | |||
---|---|---|---|
7.1 kW | |||
EER (Nominal) (1) | W/W | 3,30 (3,79 - 2,91) A | |
COP (Nominal) (1) | W/W | 3,54 (3,33 - 3,00) B | |
EER (Nominal) (1) | W/W | 3,30 (3,79 - 2,91) A | |
Heating capacity at -7°C (2) | kW | 7,52 | |
Heating capacity at -15°C (2) | kW | — | |
COP (Nominal) (1) | W/W | 3,54 (3,33 - 3,00) B | |
External static pressure (Nominal) (5) | Pa | 25 | |
External static pressure (Min) (5) | Pa | 10 | |
External static pressure (Max) (5) | Pa | 80 | |
Indoor sound pressure (Hi) (6) | dB(A) | 43 | |
Indoor sound pressure (Med) (6) | dB(A) | 41 | |
Indoor sound pressure (Lo) (6) | dB(A) | 36 | |
Elevation difference (in/out) (7) | m | 30 | |
Refrigerant (R410A) / CO2 Eq. | kg / T | 2,35 / 4,9068 |
(1) EER and COP calculation is based in accordance to EN14511.
(2) Energy Label Scale from A+++ to D. For models below 12 kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12 kW, the SEER and SCOP is calculated based on values of EU/2281/2016.
(3) The annual energy consumption is calculated in accordance to EU/626/2011.
(4) Heating capacity is calculated including defrost factor correction.
(5) Medium external static pressure setting from factory.
(6) The sound pressure of the units shows the value measured of the position 1,5 m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(7) Add 100 mm for piping port.
(8) When installing the outdoor unit at a higher position than the indoor unit. * Recommended fuse for the indoor 3 A.