BIG PACi High Static Pressure Hide Away 20,0-25,0kW • R410A
Big PACi has been introduced with full renewal of its indoor unit, offering hydronic application by PACi Water Heat Exchanger.
- Highly efficient with compact indoor body, -16kg lighter than conventional model (10 HP)
- Split-able Hide Away indoor design for easy & flexible piping work
- Better partial load control with Panasonic compressor
- Bluefin anti-rust coating
- PACi Water Heat Exchanger compatible
- Panasonic cloud control compatible
- 0-10V demand control
Ticari WLAN Adaptörü
Panasonic CZ-CAPWFC1 arayüz adaptörü kontrol, izleme, planlama ve hata uyarıları sağlayan Panasonic Comfort Cloud Uygulamasına bir veya bir grup iç ünitenin bağlanmasına olanak sağlar.
Yeni kablolu uzaktan kumanda
IoT entegrasyonlu CONEX. Akıllı telefon veya tabletle yalnızca ayrıntılı çalışma ve bakım ayarları değil, aynı zamanda servis ve teşhis işlevleri de mümkündür.
Teknik Özellikler
| BIG PACi High Static Pressure Hide Away 20,0-25,0kW • R410A | |||
|---|---|---|---|
| 20.0 kW | |||
| EER (Nominal) (1) | W/W | 3,10 | |
| COP (Nominal) (1) | W/W | 3,60 | |
| EER (1) | W/W | 3,10 | |
| Input power cooling | kW | 6,29 | |
| COP (1) | W/W | 3,60 | |
| Input power heating | W | 6,22 | |
| Indoor power supply (Voltage) | V | 220 - 230 - 240 | |
| Indoor power supply (Phase) | Single phase | ||
| Indoor power supply (Frequency) | Hz | 50 | |
| External static pressure at shipment (with booster cable) (3) | Pa | 75 - 120 - 180 | |
| Outdoor recommended fuse | A | 15 | |
| Outdoor dimension (Height) (5) | mm | 980 | |
| Outdoor dimension (Width) (5) | mm | 370 | |
| Outdoor dimension (Depth) (5) | mm | 127 | |
| Elevation difference (in/out) (6) | m | 30 | |
| Refrigerant (R410A) / CO2 Eq. | kg / T | 5,60 / 11,6928 | |
(1) EER and COP calculation is based in accordance to EN14511.
(2) For models below 12 kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12 kW, the SEER and SCOP is calculated based on values of EU/2281/2016.
(3) Low external static pressure setting from factory.
(4) The sound pressure of the units shows the value measured of the position 1,5 m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(5) Add 100 mm for indoor unit or 70 mm for outdoor unit for piping port.
(6) When installing the outdoor unit at a higher position than the indoor unit.
* No filter included.