PACi Standard Low Static Pressure Hide Away • R410A
The depth of only 250mm provides greater installation flexibility and the unit can be used in more applications. Ideal for sites with narrow ceiling voids.
- Automatic learning function for the required static pressure on site during commissioning (a standard wired remote controller is required. S-60/71/100/125/140PN1E5B models only)
- Compact indoor units without loosing static pressure (only 250 mm high)
- 50 Pa static pressure
- Easy maintenance and service via external electrical box
- 3 speed centrifugal fan through wired or Infrared remote controller
- DC FAN for better efficiency and control
- Easy connection and control of external fan or ERV using the connector PAW-FDC on the indoor unit PCB. The external device can be controlled by the remote control of the Panasonic indoor unit
Obsežna linija za trgovske prostore,
pisarne ali stanovanja
Komercialna enota zrak-zrak
Obsežna linija za trgovske prostore,
pisarne ali stanovanja
Komercialna enota zrak-zrak
Enote PACi Standard ali Elite
Dve rešitvi za trgovske prostore, pisarne ali stanovanjske objekte
Enote PACi Standard ali Elite
Dve rešitvi za trgovske prostore, pisarne ali stanovanjske objekte
Vmesnik WLAN za komercialne namene
Panasonicov vmesnik CZ-CAPWFC1 omogoča povezavo ene ali več notranjih enot z aplikacijo Panasonic Comfort Cloud za upravljanje, spremljanje, časovno razporejanje in opozorila o napakah.
Nov žični daljinski upravljalnik
CONEX z integracijo interneta stvari (IoT) Pametni telefon ali tablica ne omogočata le podrobnih nastavitev delovanja in vzdrževanja, pač pa tudi servisne in diagnostične funkcije.
Tehnični podatki
| PACi Standard Low Static Pressure Hide Away • R410A | |||
|---|---|---|---|
(1) EER and COP calculation is based in accordance to EN14511.
(2) Energy Label Scale from A+++ to D. For models below 12 kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12 kW, the SEER and SCOP is calculated based on values of EU/2281/2016.
(3) The annual energy consumption is calculated in accordance to EU/626/2011.
(4) Heating capacity is calculated including defrost factor correction.
(5) Medium external static pressure setting from factory.
(6) The sound pressure of the units shows the value measured of the position 1,5 m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(7) Add 100 mm for piping port.
(8) When installing the outdoor unit at a higher position than the indoor unit.
* Recommended fuse for the indoor 3 A.