BIG PACi High Static Pressure Hide Away 20,0-25,0kW • R410A
Big PACi has been introduced with full renewal of its indoor unit, offering hydronic application by PACi Water Heat Exchanger.
- Highly efficient with compact indoor body, -16kg lighter than conventional model (10 HP)
- Split-able Hide Away indoor design for easy & flexible piping work
- Better partial load control with Panasonic compressor
- Bluefin anti-rust coating
- PACi Water Heat Exchanger compatible
- Panasonic cloud control compatible
- 0-10V demand control
Commercial WLAN Adaptor
Panasonic CZ-CAPWFC1 interface adaptor, allows connection of one or a group of indoor units to Panasonic Comfort Cloud App, which provides control, monitoring, scheduling and error alerts.
New wired remote controller
CONEX with IoT integration. Not only detailed operation and maintenance settings are possible with the smartphone or tablet, but also service and diagnostic functions.
Specifications
| BIG PACi High Static Pressure Hide Away 20,0-25,0kW • R410A | |||
|---|---|---|---|
| 20.0 kW | |||
| EER (Nominal) (1) | W/W | 3,10 | |
| COP (Nominal) (1) | W/W | 3,60 | |
| EER (1) | W/W | 3,10 | |
| Input power cooling | kW | 6,29 | |
| COP (1) | W/W | 3,60 | |
| Input power heating | W | 6,22 | |
| Indoor power supply (Voltage) | V | 220 - 230 - 240 | |
| Indoor power supply (Phase) | Single phase | ||
| Indoor power supply (Frequency) | Hz | 50 | |
| External static pressure at shipment (with booster cable) (3) | Pa | 75 - 120 - 180 | |
| Outdoor recommended fuse | A | 15 | |
| Outdoor dimension (Height) (5) | mm | 980 | |
| Outdoor dimension (Width) (5) | mm | 370 | |
| Outdoor dimension (Depth) (5) | mm | 127 | |
| Elevation difference (in/out) (6) | m | 30 | |
| Refrigerant (R410A) / CO2 Eq. | kg / T | 5,60 / 11,6928 | |
(1) EER and COP calculation is based in accordance to EN14511.
(2) For models below 12 kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12 kW, the SEER and SCOP is calculated based on values of EU/2281/2016.
(3) Low external static pressure setting from factory.
(4) The sound pressure of the units shows the value measured of the position 1,5 m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(5) Add 100 mm for indoor unit or 70 mm for outdoor unit for piping port.
(6) When installing the outdoor unit at a higher position than the indoor unit.
* No filter included.