PACi Elite 4 way 90x90 cassette - PU3 - R32
New 4 way 90x90 cassette - PU3 for R32 PACi
- High performance turbo fan, path system for heat exchanger
- Econavi: An optional intelligent sensor to reduce waste of energy
- nanoe™ X (Generator Mark 1= 4,8 trillion OH radicals/ sec) as standard for better indoor air quality, indoor unit internal cleaning with nanoe™ X and dry operation
- Lower noise in slow fan operation
- Light weight, easy piping and integrated drain pump for quick installation
- New wired remote control CZ-RTC6BL allows easy system setting via Bluetooth®
- High volume fresh air input with optional air-intake chamber (CZ-FDU3+CZ-ATU2)
Bringing nature’s balance indoors
Specifications
PACi Elite 4 way 90x90 cassette - PU3 - R32 | |||
---|---|---|---|
14.0 kW | |||
Kit | KIT-140PU3ZH28 | ||
Remote controller | CZ-RTC6 | ||
EER (Min) (1) | W/W | 5,32 | |
EER (Max) (1) | W/W | 2,74 | |
SEER/ηsc (2) | % | 285,6 | |
Annual energy consumption cooling (3) | kWh/a | — | |
COP (Min) (1) | W/W | 5,50 | |
COP (Max) (1) | W/W | 3,27 | |
SCOP/ηsc (2) | % | 181,1 | |
Annual energy consumption heating (3) | kWh/a | — | |
Indoor air flow (Hi) | m³/min | 38,0 | |
Indoor air flow (Med) | m³/min | 29,0 | |
Indoor air flow (Lo) | m³/min | 20,0 | |
Moisture removal volume | L/h | 6 | |
Indoor sound pressure (Med) (4) | dB(A) | 40 | |
Indoor sound pressure (Lo) (4) | dB(A) | 34 | |
Indoor sound power (Hi) | dB(A) | 62 | |
Indoor sound power (Med) | dB(A) | 55 | |
Indoor sound power (Lo) | dB(A) | 49 | |
nanoe X Generator | Mark 1 | ||
Outdoor power source | V | 380 - 400 - 415 | |
Current in cooling (1p 220V / 3p 380) | A | 6,45 | |
Current in cooling (1p 230V / 3p 400) | A | 6,15 | |
Current in cooling (1p 240V / 3p 415) | A | 5,90 | |
Current in heating (1p 220V / 3p 380) | A | 5,85 | |
Current in heating (1p 230V / 3p 400) | A | 5,55 | |
Current in heating (1p 240V / 3p 415) | A | 5,35 | |
Outdoor air flow (Cool) | m³/min | 129 | |
Outdoor air flow (Heat) | m³/min | 116 | |
Outdoor sound pressure (Cool -Hi) | dB(A) | 54 | |
Outdoor sound pressure (Heat -Hi) | dB(A) | 54 | |
Outdoor sound power (Cool -Hi) | dB(A) | 71 | |
Outdoor sound power (Heat -Hi) | dB(A) | 71 | |
Outdoor dimension (Height) | mm | 1416 | |
Outdoor dimension (Width) | mm | 940 | |
Outdoor dimension (Depth) | mm | 340 | |
Pipe length range | m | 5 ~ 85 | |
Elevation difference (in/out) (5) | m | 30 |
(2) Energy Label Scale from A+++ to D. For models below 12kW, the SEER and SCOP is calculated based on values of EU/626/2011. For models above 12kW, the ηsc / ηsh values is calculated based on EN 14825.
(3) The annual energy consumption is calculated in accordance to EU/626/2011.
(4) The sound pressure of the units shows the value measured of the position 1,5m below the unit. The sound pressure is measured in accordance with Eurovent 6/C/006-97 specification.
(5) When installing the outdoor unit at a higher position than the indoor unit.
(6) For models 100~140PZH2E5(8), it is possible to operate the lowest -20°C in the computer rooms with the piping length of 30m or less.
*Recommended fuse for the indoor 3A.
** Above values are in the case of nanoe™ X OFF.