FAQ
Aquarea Smart Cloud
- > What will happen if AQUAREA Smart Cloud is remotely operated from 2 or more locations at same time?
- > When it is restored after power trip, do I need any special setting?
- > Any service which is not available on remote controller attached to AQUAREA unit, but is available on "AQUAREA Smart Cloud" only?
- > How does ECO setting of AQUAREA Smart Cloud function?
- > How does Comfort setting of AQUAREA Smart Cloud function?
-
> After ECO setting or Comfort setting on AQUAREA Smart Cloud, when temperature setting is changed by remote controller attached to AQUAREA unit, how will it become?
AQUAREA Smart Cloud at the set temperature setting is enabled, ECO setting, Comfort setting is not canceled.
Then if ECO setting Comfort setting is released, from the set temperature setting on the remote control, room temperature and hot water temperature of each heating and cooling zone is returned as shift amount.
- > Can it be used when smart phone is connected to Wireless LAN?
- > Can I use the service if smart phone is out of range?
- > Display open source license.
-
> In the condition Weekly timer of "AQUAREA Smart Cloud” is turned ON, what will happen if I turn ON Weekly timer of AQUAREA unit remote controller?
Controls of Weekly timer at AQUAREA unit remote controller and Weekly timer of ”AQUAREA Smart Cloud” operate separately . The one which is turned ON later shall be effective.
Weekly timer of "AQUAREA Smart Cloud" is off, Weekly timer control of AQUAREA unit remote controller will be effective.
※Not mention in requirement definition, Need to confirm.
- > Which formula is used to calculate the electric bill of electric statistic?
- > How to register AQUAREA Cloud Adapter?
- > How much does it cost to use the service?
-
> Other than the person who purchases AQUAREA Cloud Adapter, can other use the service?
Multiple users with different Panasonic ID (family members etc.) can access the same AQUAREA.
1. Add user
・Owner (initial setup user) shall share Device ID and Device Password of Adapter, and please register the equipment.
・Enter message to owner to request for approval. Please enter text so that owner can identify client.2. Owner (initial registered user) operation
If there is request of registration from additional user, ( ! ) is displayed on top left of Top page.
When ( ! ) is selected, it displays message to request approval from additional user.
Please select the authority according to user and approve it. After approved, additional user can also use AQUAREA Smart Cloud. - > I had applied to register as Panasonic ID member, but do not receive any email.
- > Can I change the content of temporary registration during temporary registration of new Panasonic ID membership?
-
> I had registered membership of Panasonic ID from computer, but cannot login by registered login ID.
If you have login ID and password of Panasonic Club which can login from PC, you can login by "Panasonic Smart Application" too.
Please check again whether you have entered extra character, make mistake on small letter/capital letter, is the keyboard set to Japanese full-width, use login ID of other service etc.
- > Why do I need to register membership in Panasonic ID?
- > How can I stop the service?
-
> What are the AQUAREA models that compatible with AQUAREA Smart Cloud?
It is compatible with models listed below. (on 1 July 2016)
Indoor Unit / Outdoor Unit
WH-SDC03H3E5 / WH-UD03HE5
WH-SDC05H3E5 / WH-UD05HE5
WH-SDC07H3E5 / WH-UD07HE5
WH-SDC09H3E5 / WH-UD09HE5(Models below are scheduled to be launched on August 2016)
WH-ADC0309H3E5 / WH-UD03HE5
/ WH-UD05HE5
/ WH-UD07HE5
/ WH-UD09HE5WH-ADC0309H3E5B / WH-UD03HE5
/ WH-UD05HE5
/ WH-UD07HE5
/ WH-UD09HE5WH-ADC0309H3E5UK / WH-UD03HE5
/ WH-UD05HE5
/ WH-UD07HE5
/ WH-UD09HE5 -
> What do I need to prepare to use the service?
1. Please check your smart phone or PC if it is compatible model.
・Smart phone, tablet Android OS, iOS (iPhone, iPad)
・PC Windows, MacOS2. Please confirm environment of home intern if it is always connected to broadband line. Adapter connected to HP must be able to connect to wireless LAN or wired LAN.
3. Please purchase AQUAREA Cloud Adapter (CZ-TAW1), and request installer to install it.
4. Need to register membership of Panasonic ID for personal authentication.
※This step can be omitted if you have registered membership in Panasonic ID. - > What are the services available through AQUAREA Smart Cloud?
- > Can multiple AQUAREAs be operated by 1 smart phone / PC?
-
> Can a single AQUAREA be operated by multiple smartphones or PCs?
- It can be operated when login into service from different smart phones / PCs.
- It can not be login by same Panasonic ID,but can be login by different Panasonic ID at the same time.
- If it is operated remotely from 2 or more locations simultaneously, only last operation received by AQUAREA is effective.
- Incase of login by different Panasonic ID,please refer to No.4 question.[Other than the person who purchases AQUAREA Cloud Adapter, can other use the service?]
- > After AQUAREA Cloud Adapter compatible AQUAREA is installed, can I install AQUAREA Cloud Adapter later?
- > Can anyone install the AQUAREA Cloud Adapter?
-
> How can I restore AQUAREA Cloud Adapter back to factory setting condition?
When ”WPS Switch” and "Check switch" on AQUAREA Cloud Adapter are pressed continuously for 10sec simultaneously, it will be restore back to factory setting condition.
Please pay attention on below when restore back to factory setting condition.
・When it is restored back to factory setting condition, need to delete all users that used the AQUAREA Cloud Adapter from AQUAREA Cloud Adapter.
・If AQUAREA is registered, power consumption statistic information up to date will be deleted too.
- > Which one is higher priority, remote controller attached to AQUAREA unit or remote operation from smart phone/PC?
- > Can I confirm operation status of AQUAREA by smart phone/PC?
Aquarea Smart Cloud Pro
-
> What do I need to do before using the services?
1) Make sure your PC or tablet supports the app.
- Tablet: Android, iOS (iPad)
- PC: Windows, Mac OS* Recommended browser: Chrome
2) It is necessary to register the company information as well as a login ID.
3) Usage registration is required between the company and the end user.
* The end user must first install an AQUAREA Cloud Adapter (CZ-TAW1) and be connected to the Internet.
-
> How can I register the company information?
Enter the necessary company information on the “Service application form” screen. Login IDs and e-mail addresses already used by other users cannot be registered. Because the company name is displayed on the end user screen as well as in e-mails, we recommend that you enter the official name.
We recommend that you create an internal mailing list in “E-mail address for notification.” Employees who use “AQUAREA Service Cloud” will be able to receive notification e-mails from the system after they are registered in the mailing list.
We recommend that you add the e-mail addresses of the service administrators in “E-mail address for editing company information.” - > Is there a fee to use the services?
-
> What do I need to do if I want to stop using the services?
You can withdraw from the services by pressing the “Terminate service” button on the “Edit company information” screen in “AQUAREA Service Cloud".
Once you withdraw from the services, you will not be able to use the services and functions you are currently using. Also, be aware that all entered information will be permanently lost. -
> What services can I use with “AQUAREA Service Cloud”?
AQUAREA Service Cloud” allows the user to remotely control its customers’ heating systems, thus saving time and money, and shortening response time for increased customer satisfaction.
- Global view at a glance
- Error log history
- Full unit information
- Statistics always available
- All settings available - > Are there any services that can only be used with “AQUAREA Service Cloud” and not with the remote control included with the AQUAREA unit?
- > Can multiple users use the services at the same time with one login ID?
-
> Which of the remote control included with the AQUAREA unit or the PC/tablet takes priority over the other when remotely controlling the unit?
Operations performed with the remote control included with the AQUAREA unit will be reflected even if the unit had first been remotely controlled from a PC or tablet. Remote operations performed from a PC or tablet will be reflected even if the unit had first been controlled using the remote control included with the AQUAREA unit.
- > What happens when the unit is remotely controlled using two or more instances of “AQUAREA Service Cloud” at the same time?
- > Is it possible to use the services on my PC/tablet when outside of the communication range?